04
PLASTERBOARDS’ JOINTS PRODUCT
UNIJOINT FILLERS AND PLASTERS
RUALAIX UNIJOINT 1H:30’
RX–800
FIRST AID – PERSONAL PROTECTION MEASURES
COMMENTS
INHALATION: although inhalation does not pose any specic
risk, the use of a lter mask is recommended for prolonged
use.
EYE CONTACT: remove contact lenses. Wash eyes with plenty
of clean cold water for at least minutes, pulling up the
eyelids, and seek medical attention. Use protective glasses.
CONTACT WITH SKIN: wash with water and soap or an
appropriate skin cleanser. Protective creams may help to
protect exposed skin.
INGESTION
: if the product is accidentally swallowed, seek
immediate medical attention. Do not induce vomiting.
For correct use and application of the product, it is essential
to read the technical specications rst.
The data provided in the technical specications was obtained
under normal laboratory conditions using standardised
supports. Thus, results may vary depending on the working
conditions (support, thickness applied, water used for mixing,
temperature and humidity).
The working conditions of the users of our products are
beyond our control.
The product must not be used for any purpose other than
those specied. We recommend strict adherence to the usage
instructions.
It is very important that the condition of the support be
inspected prior to every application.
Please read the SUPPORT PREPARATION SECTION carefully.
Use the product within the recommended useful life. Once
this period has been exceeded, the product may acquire
unfavourable properties.
It is advisable not exceeding the maximum thickness
recommended. Exceed this thickness can involve problems
for cracking.
Do not mix with other products as the product’s technical
characteristics will be altered.
Do not use on non-absorbent surfaces.
The maximum thicknesses are approximate and dependent
on support’s absorption, temperature and environmental
humidity.
Traditional water-paint nishes can be applied over the
product. In case of doubt, test on a small area of plaster
prior to painting.
ESTABLECIMIENTOS
BAIXENS
’ technical department advises that
new designs recently released, are considered in experimental
stage until achieving an annual data register. Thereafter, the
new design is considered totally consolidated in the market.
Meanwhile, BAIXENS reserves the right to modify its variable
features or working ranges, according to technical criteria.
Those data which are capable of modication, will be marked
with an asterisk in order to its easy identication. This could
be recently created products and/or in experimental stage
or improvements of our several ranges so as to comply with
the market’s requirements.
Our technical-sales team is at your disposal to help you with
any queries that you may have.
This sheet cancels and replaces previous versions. January 2013. We accept no responsibility arising from typographical errors
BAIXENS ESPAÑA
POL.IND.MONCARRA, S/N
46230 ALGINET (VALENCIA)
T.: 961.750.834 F.: 961.752.471
www.baixens.com
BAIXENS FRANCE
14, RUE DU PONT, NEUF
75001 PARIS (FRANCE)
T.: 0.800.90.14.37 F.: 0.800.90.20.52
www.baixens.com
BAIXENS PORTUGAL
AVENIDA DA OLIVENÇA,5
2450109 NAZARE (PORTUGAL)
T.: 262.56.04.82 F.: 262.56.04.83
www.baixens.com
BAIXENS ITALIA / BULOVA
VIA PIETRO NENNI,36
46019 CICOGNARA-MANTOVA (ITALIA)
T.: 0375/88181/790016 F.: 0375/88831
www.baixens.com
www.bulova-pennelli.com
(4 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce